Your first mix
This page takes you from the first launch to a first blend between two tracks, played by Prisme itself. To drive the decks with timecode records, set up the audio as below, then follow Setting up vinyl control.
1. Set up the audio
Section titled “1. Set up the audio”Prisme starts on your system’s default sound output. The title bar shows the driver and the device it plays on, next to a green light.
-
Open Settings with the button of the title bar, or Ctrl , (⌘ , on a Mac). It opens on the Audio page.
-
In Driver type, choose the driver for your sound card: ASIO for a DJ interface on Windows if it has one, otherwise the system’s (WASAPI, Core Audio, ALSA).
-
In Output, choose your sound card.
-
Leave Buffer on Driver default for now.
-
Open the Mixing page and choose who mixes in Mixing:
- External mixer if each deck goes to its own channel of a hardware mixer (a sound card with four outputs or more);
- Software mixer if you mix in Prisme, from a laptop alone or a controller.
-
Press Apply in the bar at the bottom. The audio restarts on your card.
Each setting is explained in Sound card and latency.
2. Add your music
Section titled “2. Add your music”Prisme reads your system’s music folder: Music on Windows and macOS, your music folder on Linux (another one can be chosen under Settings › Library). Copy your tracks there, in as many sub-folders as you like.
The library shows that folder on the left, under Music, with its sub-folders. Click one to list its tracks. In the meantime, Prisme analyses every new file in the background: the toolbar says Analysing 12 / 340 and the tempo (BPM) and key fill in as it goes. A track you load before its turn is analysed as it loads.
Prisme reads MP3, AAC, ALAC, FLAC, Ogg Vorbis, WAV and AIFF. More in Adding your music and Analysis.
3. Load a track on deck A
Section titled “3. Load a track on deck A”Deck A is the top lane, deck B the one under it. Any of these loads a track:
- Drag the track from the library onto the deck’s lane.
- Press the A or B button at the end of the track’s row.
- Double-click the track: it goes on the first deck with nothing loaded.
- Select it with ↑ ↓ and press Shift ← for deck A or Shift → for deck B.
The deck shows the title, the time remaining in large figures, the BPM and the key, and the waveform scrolls around a white playhead. See The main screen.
4. Play it
Section titled “4. Play it”Press PLAY on deck A’s rail, or S. The level meter of the title bar moves; with the software mixer, raise deck A’s fader at the end of its lane if it is down.
CUE works as on a CDJ: stopped, it sets the cue point where the deck is; while playing, it goes back to the cue point and stops; held on the cue point, it plays until you let go, then goes back there, unless you press PLAY meanwhile. Its key on the keyboard is A. More in Playing a track.
5. Get the next track ready on deck B
Section titled “5. Get the next track ready on deck B”-
Choose the next track. With Compare with set to A over the library, the keys that fit deck A’s are filled in, and the Pitch → A column gives the pitch that brings each track to deck A’s tempo.
-
Load it on deck B.
-
Listen to it in the headphones:
- with the software mixer, press the headphones button of deck B’s channel. Settings > Mixing > Headphones sets where they play;
- with an external mixer, press the cue key of deck B’s channel on your mixer.
-
Place deck B where you want to start it: click its waveform, or drag the overview under it. Press CUE while it is stopped to keep that place.
6. Sync and start
Section titled “6. Sync and start”-
Press SYNC on deck B. It takes the tempo of the leader, here deck A, and stays locked to its beats: the BPM readouts now match. Hold SYNC instead to match the tempo and the beats once, leaving deck B free.
-
Press PLAY on deck B, or K.
-
Watch the phase strip between the lanes: the beats of A along the top, those of B along the bottom. In phase, they meet and the strip says Matched; otherwise it tells by how many milliseconds B is ahead or behind.
SYNC needs a beat grid: it stays disabled until the track is analysed. With Quantize on (the default, in Settings > DJ), cues, loops and jumps land on the beat. More in Sync and tempo.
7. Blend
Section titled “7. Blend”With the software mixer:
-
On deck B’s channel, turn the LOW knob down so the two bass lines do not pile up. Click a knob’s label to kill that band at once, click again to bring it back.
-
Move the crossfader, under deck A’s lane, from A towards B. Or bring up deck B’s fader, at the end of its lane.
-
When B carries the mix, bring B’s LOW back up as you take A’s down, then finish the crossfader’s travel.
With an external mixer, do the same with the EQ, the faders and the crossfader of your hardware mixer.
Deck A ends: its remaining time turns amber in the last 30 seconds and blinks red in the last 10. Load the next track on A, and start again from step 5.
Where to go next
Section titled “Where to go next”- The main screen, piece by piece.
- Keyboard and command palette: every action from the keys, or Ctrl K and type.
- Hot cues and Loops.
- Stems: take the vocals out of a track, or keep only its drums.
- Vinyl control: put your turntables in charge.