Headphones and preview
The headphones let you hear a deck before the room does. With the software mixer, Prisme sends the decks you cue to a pair of outputs of their own, blended with the master as you like. With either mixer, you can also preview a track of the library in the headphones without loading it on a deck.
Where the headphones play
Section titled “Where the headphones play”The headphones need a stereo pair of their own on your sound card, apart from the master. A DJ interface with four outputs usually has them on 3-4.
-
Plug your headphones into the interface’s headphone socket (or the pair you want to use).
-
Open Settings > Mixing > Headphones.
-
Pick Automatic, a pair (Outputs 3-4, Outputs 5-6…), or No headphones. The line under the setting says where they are now, for instance Now on outputs 3-4., or Not heard on this device.
Automatic takes outputs 3-4 on a device with exactly four outputs and on any ASIO device. It never takes the surround channels of a computer’s built-in card (on a 5.1 or 7.1 card, 3-4 are the centre and subwoofer of the room), and a device with only two outputs has no headphones: there, choose a pair by hand if you have one, or use an interface with four outputs.
The headphones keep their pair to themselves: the Booth setting does not offer it (see Booth output).
With an external mixer, you cue on your mixer, so Prisme’s headphones carry only the preview. They need a pair that no deck uses: Automatic takes the pair after the decks’ on an ASIO interface, otherwise choose it yourself.
Cue a deck
Section titled “Cue a deck”Each channel of the software mixer has a headphones key, beside the trim and filter knobs.
- Click it to hear the deck in the headphones. It lights while the deck is cued. You can cue several decks at once.
- Double-click it to hear that deck alone: every other deck leaves the headphones.
The channel fader and the crossfader do not change what you hear in the headphones: a cued deck is heard there at full level, after its EQ, filter and effects, even with its fader closed. A muted channel (Mute the channel in the deck’s menu) is still heard in the headphones.
Cue mix, split and volume
Section titled “Cue mix, split and volume”The headphone settings are in the mixer’s menu, the ⋯ key at the end of the crossfader, on the Headphones row.
| Control | What it does |
|---|---|
| CUE/MST | What the headphones play: the cued decks only fully left (0 %), the master only fully right (100 %), a blend of both in between. |
| PHONES | The headphone volume, from silence to +3.5 dB. Double-click it for 0 dB. |
| SPLIT | Splits the headphones: the cued decks on the left ear, the master on the right, each in mono. CUE/MST has no effect while it is on. |
SPLIT is the way to mix without booth monitors: one ear on the next track, the other on what the room hears. Turn it off to blend again.
The master you hear in the headphones does not include the microphone: you do not hear your own voice, late, in your ears. To check the microphone or the aux line there, cue it with its own headphones key (see Microphone, aux and booth).
From a controller, the actions are Headphones (pre-listen), This deck alone in the headphones, Headphones: cued decks or master, Split headphones: cue left, master right and Headphones level.
The preview player
Section titled “The preview player”The preview plays a track of the library in the headphones only, without a deck. The room never hears it and it is never recorded. Use it to check a track’s intro, key or energy before you load it.
-
In the track list, click the headphones key at the end of a track’s row, beside its A and B load keys (Preview in the headphones), or select the track and press Space.
-
The track starts about a third in, where the music usually is. A strip opens under the library with the title, the time, the whole track, and a PHONES knob.
-
Click or drag along the strip’s waveform to listen from there (Click to listen from there).
-
Stop it with the strip’s stop key, the row’s key again, or Space.
The preview stops by itself at the end of the track, when you load that track on a deck, and when the audio restarts. Previewing another track replaces it. A controller can start and stop it (Preview in the headphones / stop) and move through it four seconds per step of a knob (Move through the preview).
The preview plays on the headphones’ outputs, with either mixer. If those outputs are the ones the room hears, or there are none, the row’s key says No headphones of their own to preview in: choose their outputs in the settings: set them up as in Where the headphones play.