Cues and hot cues
A track has one main cue point, where CUE brings it back, and up to 16 hot cues you jump to with a pad. All of them are saved with the track in your library, so they are there the next time you load it, on any deck.
The main cue
Section titled “The main cue”CUE sets and plays the main cue point the way a CDJ does:
| When you press CUE | What happens |
|---|---|
| The deck is playing | It goes back to the cue point and stops |
| The deck is stopped on the cue point | It plays while you hold CUE, and goes back to the cue point when you let go |
| The deck is stopped anywhere else | The cue point moves there |
Press PLAY while you hold CUE and the deck carries on playing when you let go of CUE, as on a CDJ.
A track without a cue point cues from its start. With quantize on, a new cue point lands on the nearest beat and the deck moves onto it. On the waveform, the main cue is a line with a flag marked C.
The keys are A for deck A and J for deck B. While a record drives the deck, the CUE key is not shown: the turntable is the transport. See Playing a track.
Cue actions for controllers
Section titled “Cue actions for controllers”There is a single way CUE behaves, the CDJ one. For other habits, these actions can be mapped on a controller or run from the command palette:
| Action | What it does |
|---|---|
| Cue (hold to preview) | The CUE key itself |
| To the cue and play | Goes to the cue point and plays |
| To the cue, stopped | Goes to the cue point and stops |
| To the cue | Goes to the cue point, playing or not as it was |
| The cue here | Sets the cue point where the deck is, without stopping it |
A controller’s CUE light shows where the deck is, as on a CDJ: on while the deck sits on its cue point, a different state while it is stopped elsewhere (where a press would set the cue), and off while it plays.
Hot cues
Section titled “Hot cues”Hot cues live on the pads, in the CUES mode, the one the pads start in. There are 16 per track, on two pages of eight: the key after the pads, 1–8 or 9–16, shows the page you see and switches to the other.

An empty pad is dashed and shows its number. A pad with a hot cue shows its number, or the cue’s name if it has one, over a bar in its colour.
| To | Do this |
|---|---|
| Set a hot cue | Click an empty pad: the hot cue goes where the deck is |
| Jump to it | Click its pad |
| Delete it | Shift-click its pad, or right click it |
A jump keeps the deck as it was: a playing deck plays on from the hot cue, a stopped one waits there. With quantize on, a hot cue set lands on the nearest beat, and a jump while the deck plays keeps the beat: the deck lands at the same place of the beat it left, so the mix stays in time.
On the waveform, each hot cue is a line with a numbered flag in its colour; on the overview, a tick.
From the keyboard
Section titled “From the keyboard”The keyboard reaches the first page of hot cues. A key on an empty hot cue sets it; on a set one, jumps to it.
| Hot cue | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|
| Deck A | 1 | 2 | 3 | 4 | Q | W | E | R |
| Deck B | 7 | 8 | 9 | 0 | U | I | O | P |
Keys are named as on a US QWERTY keyboard; on another layout, use the keys in the same places. Decks C and D take the keys of A and B with Shift held. Deleting a hot cue takes the mouse or a controller.
On a controller, all 16 can be mapped (Hot cue 1 to Hot cue 16, and Delete hot cue 1 to Delete hot cue 16). See Actions.
Saved loops
Section titled “Saved loops”A hot cue set while a loop plays saves the loop instead of a point. Its pad shows ↻ after its number. Pressing it brings the loop back and plays it from its start. To save a loop:
- Set a loop and let it play (see Loops, rolls and jumps).
- Click an empty hot cue pad while it loops.
- Later, press that pad to jump into the loop wherever the deck is.
Colours
Section titled “Colours”Each hot cue takes the colour of its slot, in the usual DJ order:
| Hot cue | 1 and 9 | 2 and 10 | 3 and 11 | 4 and 12 | 5 and 13 | 6 and 14 | 7 and 15 | 8 and 16 |
|---|---|---|---|---|---|---|---|---|
| Colour | Red | Orange | Yellow | Green | Aqua | Blue | Violet | Pink |
The second page takes the colours of the first. A controller with coloured pads shows each hot cue in the nearest colour it has.
Cues from rekordbox and Serato
Section titled “Cues from rekordbox and Serato”When you import a rekordbox or Serato library, the cues come with the tracks: each hot cue goes to its own slot if it is free, keeping its colour and its name, which the pad shows. A memory cue becomes the main cue if the track has none, and a saved loop without a slot takes the first free hot cue. Cues you set in Prisme are never replaced, and a cue already at the same place is not added twice. See Import from other software.