Skip to content

Sampler

Each deck has its own sampler: 16 slots for short sounds (a horn, a vocal shout, a drop), played from the pads in the SMPL mode. The sounds go through the deck’s channel, so its EQ, its fader, its fader cuts and its effects (when they are on the whole deck rather than on a stem) shape them too. They work on a deck with no track loaded.

A deck’s rail in the SMPL mode: five pads with sound names on a violet bar, Riser playing in the light, three empty pads marked +, the page key 1–8 and the VOL knob

  1. On the deck’s pads, choose the SMPL mode.
  2. Click an empty pad, marked +: a window opens to choose a sound.
  3. Pick an audio file (MP3, FLAC, WAV, AIFF, M4A, AAC, MP4 or OGG). The pad shows the file’s name.

A sound lasts 30 seconds at most: a longer file is refused with A sampler sound lasts 30 s at most: load longer files on a deck.

The 16 slots are on two pages of eight: the key after the pads, 1–8 or 9–16, switches page. Prisme remembers the sounds of every slot and loads them again at the next start (keep the files where they are).

To Do this
Play a sound Click its pad: it plays from its start, once, to its end
Play it again from the start Click its pad again while it plays
Stop it Right click its pad while it plays
Take it off its pad Right click it while it is silent, or Shift-click it

A pad lights while its sound plays, and several sounds can play at once. With quantize on and the deck playing on a beat grid, a sound waits for the deck’s next beat, so it lands in time. Otherwise it starts at once.

Sounds play at their own pitch and speed: the deck’s tempo and KEY LOCK do not change them.

In the SMPL mode, the VOL knob beside the pads sets how loud the deck’s sampler plays, from silent to 100 %. Double-click it to go back to 100 %. It acts on all 16 sounds of that deck, and is kept for the next start.

On a controller, Sampler level sets one deck’s, and Level of every deck’s sampler sets them all at once.

A controller with pads that sense how hard they are hit can play the sampler with that strength. A profile maps a pad to the sample “as hard as the pad is hit” (deck1.sample3.velocity plays deck A’s sound 3); see Controller profiles.

The strength scales that sound alone, under the deck’s sampler level: a soft hit plays the sound quietly, and the VOL knob, like the sounds that follow, stays as it was.

On a controller, each slot has several actions, to suit the pads you have:

Action What it does
Sample 1 Plays the sound, from its start
Sample 1 while held Plays the sound while the key is held, and stops it when you let go
Sample 1: load the selected track, play, or stop A smart pad: on an empty slot it loads the track selected in the library; on a loaded one it plays it; on one playing it stops it
Stop sample 1 Stops the sound
Empty sample slot 1 Takes the sound off its slot
The selected track into sample slot 1 Loads the track selected in the library into the slot

And the same for slots 2 to 16. A sampler pad’s light shows three states: empty, loaded, and playing; profiles give each state its colour. See Actions.