Référence des actions
Voici toutes les actions qu’une commande peut piloter. Ce sont les mêmes actions que celles du clavier et de la palette de commandes, avec les mêmes noms : la colonne Action donne le nom que les réglages affichent à côté d’Apprendre, et l’Id est la target à écrire dans un profil.
Cette liste est lue dans les actions de la version actuelle de Prisme à chaque construction de ce site.
Les types d’action
Section intitulée « Les types d’action »| Type | Piloté par | |
|---|---|---|
| button | Une touche ou un pad | Agit à l’appui. Certaines agissent tant qu’on les tient et s’arrêtent au relâchement : leur nom le dit, tant que c’est appuyé. |
| fader | Un fader ou un potard | Suit sa position de 0 à 1. Un encodeur sans fin peut aussi en piloter un : chaque pas le déplace d’une fraction de sa course. Le fader d’un contrôleur ne reprend le réglage qu’une fois qu’il l’a atteint : le son ne saute jamais. |
| encoder | Un potard sans fin ou un jog | Lit des pas vers la droite et vers la gauche. |
| light | Rien : c’est un voyant seulement | Montre un état sur un voyant du contrôleur (sur le temps, le niveau qui sature…). Seuls les voyants d’un profil s’en servent. |
Beaucoup de touches qui activent et coupent quelque chose vont par trois : deck1.slip bascule, deck1.slip.on et deck1.slip.off forcent l’état quel qu’il soit, pour les contrôleurs qui ont un interrupteur ou deux touches.
Les actions nommées par une mesure
Section intitulée « Les actions nommées par une mesure »En plus des actions listées plus bas, un profil peut nommer des actions par un nombre. Elles n’apparaissent pas dans la liste des réglages et ne peuvent donc pas y être apprises : écrivez-les dans un profil.
| Id | Action | Exemple |
|---|---|---|
deckN.jump.<beats> |
Un saut d’autant de temps, en arrière sous zéro | deck1.jump.-8, deck1.jump.16 |
deckN.loop.<beats> |
Une boucle d’autant de temps ; allumée pendant que cette boucle tourne | deck1.loop.0.25, deck1.loop.8 |
deckN.roll.<beats> |
Un loop roll d’autant de temps tant que c’est appuyé | deck1.roll.0.5 |
deckN.key.<semitones> |
La tonalité décalée d’autant de demi-tons par rapport à celle du morceau ; allumée tant qu’elle l’est | deck1.key.+2, deck1.key.-1 |
deckN.sample<n>.velocity |
Le sample n (1 à 16) joué aussi fort que son pad est frappé |
deck2.sample3.velocity |
Les temps peuvent être une fraction (0.25, 0.5) et ne doivent pas valoir zéro ; boucles et rolls prennent une taille supérieure à zéro, et la tonalité un nombre entier de demi-tons. Un profil a aussi les actions de ses propres modes de pads, mode.<group>.<mode>, et de ses shifts nommés, shift.<name> : voir Modes.
Toutes les actions
Section intitulée « Toutes les actions »DecksMixerControllerLibraryGeneralAuto DJ
Aucune action ne correspond.
Decks
Chaque deck les a toutes : mettez son numéro à la place de N, deck1 pour le deck A à deck4 pour le deck D.
| Id | Action | Type |
|---|---|---|
deckN.play | Play / pause | button |
deckN.cue | Cue (hold to preview) | button |
deckN.sync | Sync | button |
deckN.sync.on | Sync: on | button |
deckN.sync.off | Sync: off | button |
deckN.hotcue<n> | Hot cue <n> (1 à 16) | button |
deckN.hotcue<n>.delete | Delete hot cue <n> (1 à 16) | button |
deckN.jog | Jog wheel (turn) | encoder |
deckN.jog.touch | Jog wheel (touch: scratch) | button |
deckN.jog.search | Jog wheel (search through the track) | encoder |
deckN.loop | Loop 4 beats / exit | button |
deckN.loop.in | Loop in | button |
deckN.loop.out | Loop out | button |
deckN.reloop | Reloop | button |
deckN.loop.halve | Halve the loop | button |
deckN.loop.double | Double the loop | button |
deckN.jump.back | Jump back by the size | button |
deckN.jump.forward | Jump ahead by the size | button |
deckN.loop.size | Loop of the size / exit | button |
deckN.size.halve | Halve the size | button |
deckN.size.double | Double the size | button |
deckN.size | Size of the jumps and the loop (a step halves or doubles it) | encoder |
deckN.bend.down | Slow down while held | button |
deckN.bend.up | Speed up while held | button |
deckN.tempo.reset | Tempo back to the track | button |
deckN.tempoRange | Tempo fader range: next | button |
deckN.tempoRange.previous | Tempo fader range: previous | button |
deckN.key.up | Key up a semitone | button |
deckN.key.down | Key down a semitone | button |
deckN.key.reset | Key back to the track | button |
deckN.slip | Slip | button |
deckN.slip.on | Slip: on | button |
deckN.slip.off | Slip: off | button |
deckN.censor | Censor while held | button |
deckN.brake | Brake (stopped: soft start) | button |
deckN.spinback | Spinback while held | button |
deckN.reverse | Reverse | button |
deckN.reverse.on | Reverse: on | button |
deckN.reverse.off | Reverse: off | button |
deckN.reverse.held | Reverse while held | button |
deckN.repeat | Repeat the track | button |
deckN.repeat.on | Repeat the track: on | button |
deckN.repeat.off | Repeat the track: off | button |
deckN.faderStart | Fader start | button |
deckN.faderStart.on | Fader start: on | button |
deckN.faderStart.off | Fader start: off | button |
deckN.keylock | Key lock | button |
deckN.keylock.on | Key lock: on | button |
deckN.keylock.off | Key lock: off | button |
deckN.vocals | Vocals | button |
deckN.instrumental | Instrumental | button |
deckN.drums | Drums | button |
deckN.bass | Bass | button |
deckN.melody | Melody (the other instruments) | button |
deckN.vocals.level | Vocals level | fader |
deckN.instrumental.level | Instrumental level | fader |
deckN.drums.level | Drums level | fader |
deckN.bass.level | Bass level | fader |
deckN.melody.level | Melody level | fader |
deckN.sample<n> | Sample <n> (1 à 16) | button |
deckN.fx | Effect 1 on / off | button |
deckN.fx.on | Effect 1 on | button |
deckN.fx.off | Effect 1 off | button |
deckN.fx.next | Effect 1: next effect | button |
deckN.fx.previous | Effect 1: previous effect | button |
deckN.fx.echo | Effect 1: Echo on / off | button |
deckN.fx.pingPong | Effect 1: Ping-pong echo on / off | button |
deckN.fx.reverb | Effect 1: Reverb on / off | button |
deckN.fx.flanger | Effect 1: Flanger on / off | button |
deckN.fx.phaser | Effect 1: Phaser on / off | button |
deckN.fx.filter | Effect 1: Filter on / off | button |
deckN.fx.gate | Effect 1: Gate on / off | button |
deckN.fx.bitcrusher | Effect 1: Bitcrusher on / off | button |
deckN.fx.mix | Effect 1 level | fader |
deckN.fx.amount | Effect 1 amount | fader |
deckN.fx.param2 | Effect 1 second knob (tone, resonance… as the effect has) | fader |
deckN.fx.beats | Effect 1 period (a step halves or doubles it) | encoder |
deckN.fx.period | Effect 1 period, along the knob | fader |
deckN.fx.kind | Effect 1: the effect, along the knob | fader |
deckN.fx.focus | Effect 1 focused on the effect knobs / let go | button |
deckN.fx.held | Effect 1 on while held | button |
deckN.fx2 | Effect 2 on / off | button |
deckN.fx2.on | Effect 2 on | button |
deckN.fx2.off | Effect 2 off | button |
deckN.fx2.next | Effect 2: next effect | button |
deckN.fx2.previous | Effect 2: previous effect | button |
deckN.fx2.echo | Effect 2: Echo on / off | button |
deckN.fx2.pingPong | Effect 2: Ping-pong echo on / off | button |
deckN.fx2.reverb | Effect 2: Reverb on / off | button |
deckN.fx2.flanger | Effect 2: Flanger on / off | button |
deckN.fx2.phaser | Effect 2: Phaser on / off | button |
deckN.fx2.filter | Effect 2: Filter on / off | button |
deckN.fx2.gate | Effect 2: Gate on / off | button |
deckN.fx2.bitcrusher | Effect 2: Bitcrusher on / off | button |
deckN.fx2.mix | Effect 2 level | fader |
deckN.fx2.amount | Effect 2 amount | fader |
deckN.fx2.param2 | Effect 2 second knob (tone, resonance… as the effect has) | fader |
deckN.fx2.beats | Effect 2 period (a step halves or doubles it) | encoder |
deckN.fx2.period | Effect 2 period, along the knob | fader |
deckN.fx2.kind | Effect 2: the effect, along the knob | fader |
deckN.fx2.focus | Effect 2 focused on the effect knobs / let go | button |
deckN.fx2.held | Effect 2 on while held | button |
deckN.fx3 | Effect 3 on / off | button |
deckN.fx3.on | Effect 3 on | button |
deckN.fx3.off | Effect 3 off | button |
deckN.fx3.next | Effect 3: next effect | button |
deckN.fx3.previous | Effect 3: previous effect | button |
deckN.fx3.echo | Effect 3: Echo on / off | button |
deckN.fx3.pingPong | Effect 3: Ping-pong echo on / off | button |
deckN.fx3.reverb | Effect 3: Reverb on / off | button |
deckN.fx3.flanger | Effect 3: Flanger on / off | button |
deckN.fx3.phaser | Effect 3: Phaser on / off | button |
deckN.fx3.filter | Effect 3: Filter on / off | button |
deckN.fx3.gate | Effect 3: Gate on / off | button |
deckN.fx3.bitcrusher | Effect 3: Bitcrusher on / off | button |
deckN.fx3.mix | Effect 3 level | fader |
deckN.fx3.amount | Effect 3 amount | fader |
deckN.fx3.param2 | Effect 3 second knob (tone, resonance… as the effect has) | fader |
deckN.fx3.beats | Effect 3 period (a step halves or doubles it) | encoder |
deckN.fx3.period | Effect 3 period, along the knob | fader |
deckN.fx3.kind | Effect 3: the effect, along the knob | fader |
deckN.fx3.focus | Effect 3 focused on the effect knobs / let go | button |
deckN.fx3.held | Effect 3 on while held | button |
deckN.fx.chain | Effects (the whole chain) | button |
deckN.fx.chain.on | Effects (the whole chain): on | button |
deckN.fx.chain.off | Effects (the whole chain): off | button |
deckN.fx.knob1 | Effect knob 1: effect 1's amount, or the focused effect's | fader |
deckN.fx.knob2 | Effect knob 2: effect 2's amount, or the focused effect's second knob | fader |
deckN.fx.knob3 | Effect knob 3: effect 3's amount, or the focused effect's period | fader |
deckN.fx.super | Effect amounts together (super knob) | fader |
deckN.fx.part | Effects on the next part | button |
deckN.roll1 | Roll 1/16 while held | button |
deckN.roll2 | Roll 1/8 while held | button |
deckN.roll3 | Roll 1/4 while held | button |
deckN.roll4 | Roll 1/2 while held | button |
deckN.roll5 | Roll 1 while held | button |
deckN.roll6 | Roll 2 while held | button |
deckN.roll7 | Roll 4 while held | button |
deckN.roll8 | Roll 8 while held | button |
deckN.slice<n> | Slice <n> while held (1 à 8) | button |
deckN.cut1 | Fader cut on 1/16 while held | button |
deckN.cut2 | Fader cut on 1/8 while held | button |
deckN.cut3 | Fader cut on 1/4 while held | button |
deckN.cut4 | Fader cut on 1/2 while held | button |
deckN.pitch | Tempo | fader |
deckN.volume | Volume | fader |
deckN.trim | Gain | fader |
deckN.eq.low | EQ low | fader |
deckN.eq.mid | EQ mid | fader |
deckN.eq.high | EQ high | fader |
deckN.eq.low.kill | Kill the bass while held | button |
deckN.eq.mid.kill | Kill the mids while held | button |
deckN.eq.high.kill | Kill the highs while held | button |
deckN.filter | Filter | fader |
deckN.headphones | Headphones (pre-listen) | button |
deckN.headphones.on | Headphones (pre-listen): on | button |
deckN.headphones.off | Headphones (pre-listen): off | button |
deckN.mute | Mute the channel | button |
deckN.mute.on | Mute the channel: on | button |
deckN.mute.off | Mute the channel: off | button |
deckN.headphones.solo | This deck alone in the headphones | button |
deckN.passthrough | Passthrough: the deck plays its input | button |
deckN.passthrough.on | Passthrough: the deck plays its input: on | button |
deckN.passthrough.off | Passthrough: the deck plays its input: off | button |
deckN.cue.play | To the cue and play | button |
deckN.cue.stop | To the cue, stopped | button |
deckN.cue.goto | To the cue | button |
deckN.cue.set | The cue here | button |
deckN.start | To the start, stopped | button |
deckN.start.play | To the start and play | button |
deckN.start.keep | To the start | button |
deckN.end | To the end | button |
deckN.eject | Eject the track | button |
deckN.sync.once | Match the tempo and beats once | button |
deckN.sync.leader | Lead the other decks | button |
deckN.search.back | Run back through the track while held | button |
deckN.search.forward | Run through the track while held | button |
deckN.tempo.up | Tempo up 0.1 % | button |
deckN.tempo.down | Tempo down 0.1 % | button |
deckN.tempo | Tempo, 0.1 % a step | encoder |
deckN.bend.down.small | Slow down a little while held | button |
deckN.bend.up.small | Speed up a little while held | button |
deckN.position | Place in the track (a touch strip) | fader |
deckN.key.sync | Key matched to the other deck | button |
deckN.key | Key, from 12 semitones down to 12 up | fader |
deckN.loop.clear | Forget the loop | button |
deckN.reloop.stop | Back to the loop, stopped | button |
deckN.loop.in.goto | To the start of the loop | button |
deckN.loop.out.goto | To the end of the loop | button |
deckN.loop.move.back | Loop a beat back | button |
deckN.loop.move.forward | Loop a beat forward | button |
deckN.loop.move | Loop moved, a beat a step | encoder |
deckN.grid.here | A beat of the grid here | button |
deckN.grid.earlier | Beat grid earlier | button |
deckN.grid.later | Beat grid later | button |
deckN.grid.faster | Beat grid faster | button |
deckN.grid.slower | Beat grid slower | button |
deckN.grid.move | Beat grid moved, a few milliseconds a step | encoder |
deckN.tap | Tap the tempo | button |
deckN.slip.held | Slip while held | button |
deckN.filter.toggle | Filter heard or not | button |
deckN.crossfader.left | On the left of the crossfader | button |
deckN.crossfader.center | Heard whatever the crossfader | button |
deckN.crossfader.right | On the right of the crossfader | button |
deckN.sampler.gain | Sampler level | fader |
deckN.sample<n>.stop | Stop sample <n> (1 à 16) | button |
deckN.sample<n>.eject | Empty sample slot <n> (1 à 16) | button |
deckN.sample<n>.load | The selected track into sample slot <n> (1 à 16) | button |
deckN.sample<n>.held | Sample <n> while held (1 à 16) | button |
deckN.sample<n>.smart | Sample <n>: load the selected track, play, or stop (1 à 16) | button |
deckN.vinyl | Vinyl control | button |
deckN.vinyl.on | Vinyl control: on | button |
deckN.vinyl.off | Vinyl control: off | button |
deckN.jog.scratch | Jog wheel: a touch scratches, or only nudges | button |
deckN.jog.scratch.on | Jog wheel: a touch scratches, or only nudges: on | button |
deckN.jog.scratch.off | Jog wheel: a touch scratches, or only nudges: off | button |
deckN.beat | Light: on the beat | light |
deckN.clip | Light: the level past full scale | light |
deckN.ending | Light: the end of the track near (soon: 10 s) | light |
deckN.tempo.zero | Light: at the track's tempo | light |
deckN.tempo.slower | Light: slower than the deck it mixes with | light |
deckN.tempo.faster | Light: faster than the deck it mixes with | light |
deckN.phase | Light: in phase with the leader | light |
deckN.phase.ahead | Light: ahead of the leader | light |
deckN.phase.behind | Light: behind the leader | light |
deckN.loop.any | Light: a loop playing | light |
Mixer
| Id | Action | Type |
|---|---|---|
mixer.crossfader | Crossfader | fader |
mixer.cueMix | Headphones: cued decks or master | fader |
mixer.headphones.split | Split headphones: cue left, master right | button |
mixer.headphones.split.on | Split headphones: cue left, master right: on | button |
mixer.headphones.split.off | Split headphones: cue left, master right: off | button |
mixer.balance | Master balance | fader |
mixer.booth | Booth level | fader |
mixer.mic | Microphone level | fader |
mixer.mic.on | Microphone on / off | button |
mixer.mic.cue | Microphone in the headphones | button |
mixer.aux | Aux line level | fader |
mixer.aux.on | Aux line on / off | button |
mixer.aux.cue | Aux line in the headphones | button |
mixer.talkover | Talkover: the music ducks under the microphone | button |
mixer.talkover.on | Talkover: the music ducks under the microphone: on | button |
mixer.talkover.off | Talkover: the music ducks under the microphone: off | button |
mixer.headphones | Headphones level | fader |
mixer.main | Master level | fader |
mixer.crossfaderCurve | Crossfader curve: smooth, then sharp | fader |
mixer.crossfaderCurve.next | The other crossfader curve | button |
mixer.crossfader.reverse | Crossfader sides swapped | button |
mixer.crossfader.reverse.on | Crossfader sides swapped: on | button |
mixer.crossfader.reverse.off | Crossfader sides swapped: off | button |
sampler.gain | Level of every deck's sampler | fader |
main.clip | Light: the master past full scale | light |
Controller
| Id | Action | Type |
|---|---|---|
shift | Shift (second use of the controls) | button |
Library
| Id | Action | Type |
|---|---|---|
library.browse | Browse | encoder |
library.previous | Previous track | button |
library.next | Next track | button |
library.load1 | Load on deck A | button |
library.load2 | Load on deck B | button |
library.load3 | Load on deck C | button |
library.load4 | Load on deck D | button |
library.load | Load on a free deck | button |
library.load1.play | Load on deck A and play | button |
library.load2.play | Load on deck B and play | button |
library.load3.play | Load on deck C and play | button |
library.load4.play | Load on deck D and play | button |
library.preview | Preview in the headphones / stop | button |
library.preview.stop | Stop the preview | button |
library.preview.seek | Move through the preview | encoder |
library.double1 | Instant double on deck A | button |
library.double2 | Instant double on deck B | button |
library.double3 | Instant double on deck C | button |
library.double4 | Instant double on deck D | button |
library.remove | Remove from the crate or prepare list | button |
library.prepare | Add to the prepare list | button |
library.selectAll | Select all the tracks | button |
library.clearSelection | Clear the selection | button |
library.search | Search | button |
library.focus | Browse the lists or the tracks | button |
library.lists | Browse the lists (prepare, crates) | encoder |
library.list.open | Open the list pointed at | button |
library.list.next | Open the next list | button |
library.list.previous | Open the previous list | button |
library.go | Open the list, or load the track on a stopped deck | button |
library.left | To the lists | button |
library.right | To the tracks | button |
library.page.previous | A page of tracks up | button |
library.page.next | A page of tracks down | button |
library.sort.title | Tracks by title | button |
library.sort.artist | Tracks by artist | button |
library.sort.bpm | Tracks by tempo | button |
library.sort.key | Tracks by key | button |
General
| Id | Action | Type |
|---|---|---|
general.library | The library over the whole window | button |
general.record | Record the mix | button |
general.quantize | Quantize | button |
general.quantize.on | Quantize: on | button |
general.quantize.off | Quantize: off | button |
general.tempoRange | Range of every tempo fader: next | button |
general.tempoRange.previous | Range of every tempo fader: previous | button |
general.help | Keyboard shortcuts | button |
general.palette | Command palette | button |
general.settings | Settings | button |
Auto DJ
| Id | Action | Type |
|---|---|---|
autodj.toggle | Auto DJ on / off | button |
autodj.fade | Mix into the next track now | button |
autodj.skip | Skip the next track | button |
303 lignes, lues dans les actions de cette version de Prisme.